Features

Design benefits

warmth

150 g/sqm padded lining on the body and 100 g/sqm on the arms. Fleece back.

waterproof

Waterproof coating 5,000 mm H²O (Schmerber). 100% taped seams

protection from the weather

Adjustable hood, semi-elasticated sleeves & tightening toggle at the jacket hem.

pockets

2 fleece-lined secure hand pockets, 1 inside chest pocket.

Design details

Can I be sure that my jacket is warm enough for my winter hikes?

We developed your jacket for wintry conditions: cold, rain and snow. The insulation is made from 150 g/sqm wadding on the body and 100 g/sqm on the arms combined with a fleece.(synthetic insulating component thanks to the air that it stores in its fibres) We added an inside flap under the zip fastening to block incoming cold air. The toggle tightening at the jacket hem is the finishing touch to ensure your jacket is comfortable down to -10°.

How does my jacket protect me from outdoor conditions?

Your jacket is designed with a waterproof outer component that keeps out water and wind. To keep you warm in winter you must also protect your extremities (head, hands, feet). The warm hood, the Velcro fastenings at the cuffs and the high collar prevent the cold from entering. Two warm pockets in extremely soft fleece protect your hands from the cold.

WATERPROOFNESS OF THIS JACKET

The waterproofness of a jacket isn’t limited to just its components: the assembly technique of the different parts is also an evaluation criterion. Whether heat-sealed or sewn then waterproofed, the overall waterproofness of your jacket is measured using a shower test developed by Decathlon, which simulates rain of different intensities. As such, this waterproof jacket protects you from a downpour, i.e. 12 cm of rain in 2 hours.

COMPONENT WATERPROOFING OF THIS JACKET

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerber or mm H²0 (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. This jacket has a waterproof coating (JIS 1092 standard) resistant to 5,000 mm H²O (Schmerbers) before washing.

Water often gets in through the seams. Does my jacket have waterproof seams?

Your jacket is waterproof thanks to the fully taped seams. Waterproof tape is added to the seams inside the garment to make them watertight so that water cannot enter through the more vulnerable areas. We validated the waterproofing with a shower test specially designed to replicate the conditions of a two-hour shower. We also wore it in the field in all weather conditions to make sure that it is suited to your activities.

A practical jacket with smart details

Lots of spaces to keep all your accessories safe and handy (tissues, keys, phone, etc.) during your hikes. Two lined pockets under a flap with a press stud fastening on the outside and a secure pocket with rip-tab fastening inside. A secure zip pocket also available on the chest.

How to preserve the technical qualities of my jacket?

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Products (spray or liquid) for this purpose are available in our stores.

A cold weather jacket comfortable for everyday wear.

Jacket designed with sufficient volume inside so that a warm second layer such as fleece or light down can be worn. Its classic cut is ideal for protecting you from the cold and wind during your winter hikes on all types of terrains.

Sizing and fit information

Close-fitting feminine cut. The jacket is designed to be worn with a warm second layer such as a fleece or a light down jacket.

How to dress properly for snow hiking?

To dress properly in winter, whatever your activity, we recommend using the 3-layer principle: layer 1: The high-tech base layer transfers moisture away from the body to keep your skin dry. layer 2: The second layer (fleece, sweater) provides warmth and transfers moisture outwards. layer 3: The jacket protects you from the outdoor conditions: rain, snow, wind. The whole outfit must be breathable in order to eliminate moisture.

How does my product warranty work?

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

DON'T THROW IT, FIX IT!

Our products will join you on your mountain walks. As you progress, they age, and some parts can get worn or break. We use standard components available on the market to make repair easier. Don't throw away, repair !

frequency	occasional
main material	synthetic
waterproof	waterproof
hood	with hood
pocket	inside pocket, key/phone pocket, zip closed pocket, warm fleece pocket
fit	standard
style	plain
ventilation system	without ventilation
mm H2O (Schmerbers)	5,000 mm
windproof	windproof
lining material	synthetic
type of length	mid-long
season	winter, autumn
sleeves length	long sleeves
type of waterproofing	coating
thumb pass	without thumb pass
type of hood	adjustable hood, lined hood

Women’s hiking waterproof winter jacket - SH500 -10°C

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Storage

Cleaning

Environmental impact

Ecodesign approach